MANUAL PROGRAM Operation
MANUAL PROGRAM operation enables you to activate any of the three (A, B or C)
programs, regardless of their set START TIMES. Only one program can be activated by the
MANUAL PROGRAM operation. Any run time adjustment made in MANUAL PROGRAM
is temporary and will not affect the actual run times in the programs.
Rain sensor does not affect Manual Program and Manual Station operations.
Step 1 – Place the function dial to the MANUAL PROGRAM
position.
Step 2 – Press
to activate MANUAL PROGRAM operation.
Step 3 – Press
PRG
to select the program being modified. Select from
A
,
B
or
C
.
Step 4 – To modify the station run times temporarily, press
or
to select the Station
number being modified. Press
or
to adjust the desired run time duration.
Step 5 – Turn the function dial slowly to the
RUN
position to activate. The selected
program will be activated until all programmed stations are cycled, then the
controller will revert to normal operation.
Turning OFF Operation and Shutting Down Lawn Master II
Place the function dial in the
OFF
position to turn off any operation currently in
progress. While the function dial is in the
OFF
position, any scheduled watering
programs will be prevented from activating. For extended sprinkler system shutdown, leave
the control dial in the
OFF
position.
Place the function dial to
RUN
to resume operations.
Downloaded from
www.Manualslib.com
manuals search engine
