Maintenance
26
Tire Pressure
Service Interval/Specification
Maintain the air pressure in the front and rear tires as
specified. Check the pressure at the valve stem after
every 25 operating hours or monthly, whichever
occurs first (Fig. 27). Check the tires when they are
cold to get the most accurate pressure reading.
Pressure: 12 psi (83 kPa) front and rear
1
Figure 27
1.
Valve stem
Cleaning Engine Cooling
Systems
Before each use, check and clean cooling screen.
Remove any build–up of grass, dirt or other debris
from the engine air intake. Every 100 hours clean
engine cylinder and cylinder head cooling fins. Also
clean around carburetor, governor levers and linkage.
This will help insure adequate cooling to engine and
will reduce the possibility of overheating and
mechanical damage.
1.
Clean off engine air intake (Fig. 28).
2.
Blow out fins of engine and screen with
compressed air. If area between screen and fins is
tightly packed, remove engine shroud.
m–3386
1
Figure 28
1.
Engine air intake
Summary of Contents for 73429
Page 7: ...Safety 5 Slope Chart Read all safety instructions on pages 2 4...
Page 8: ...6...
Page 42: ......
Page 43: ......
