and replace with manufacturers' recommended parts,
when necessary.
•
Mower blades are sharp and can cut. Wrap the blade(s) or
wear gloves, and use extra caution when servicing them.
•
Check for proper brake operation frequently. Adjust and
service as required.
•
Maintain or replace safety and instruction decals as
necessary.
•
Use only genuine Toro replacement parts to ensure that
original standards are maintained.
Toro Riding Mower Safety
The following list contains safety information specific to Toro
products or other safety information that you must know that
may not be included in the ANSI standards.
•
Stop the engine, move the motion control levers to neutral
and outward to the park position, disengage the blade
control switch, remove key before and disconnect spark
plug wire(s) performing any service, repairs, maintenance
or adjustments.
•
Keep hands, feet, hair, and loose clothing away from
attachment discharge area, underside of mower and any
moving parts while engine is running.
•
Do not touch equipment or attachment parts which may
be hot from operation. Allow to cool before attempting
to maintain, adjust or service.
•
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your face,
eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks and
flames away from battery.
•
Use only Toro approved attachments. Warranty may be
voided if used with unapproved attachments.
•
If loading the machine onto a trailer or truck, use a single,
full-width ramp only. The ramp angle should not exceed
15 degrees.
6
Summary of Contents for 74395
Page 10: ...119 8874 1 Low speed 2 High speed 10 ...
Page 50: ...Schematics g017655 Electrical Diagram Rev A 50 ...
Page 51: ...Notes 51 ...
