the sail area only (Figure 97). Repeat this procedure
until the blade is balanced.
Figure 97
1.
Blade
2.
Balancer
Installing the Blades
1.
Install the blade onto the spindle shaft (Figure 98).
Important:
The curved part of the blade must be
pointing upward toward the inside of the mower to
ensure proper cutting.
2.
Install the spring disk and blade bolt. The spring disk
cone must be installed toward the bolt head (Figure 98).
Torque the blade bolt to 85-110 ft-lb (115-150 N-m).
59
Summary of Contents for 74901 Z Master 5000
Page 66: ...Schematics Wire Diagram Rev A 66 ...
Page 67: ...Notes 67 ...
