9
Assembly
Loose Parts
Note:
Use the chart below to verify that all parts have been shipped.
DESCRIPTION
QTY.
USE
Traction Unit
Valve Lever
1
1
Install valve lever
Key
2
Start engine
Hydraulic oil filter
1
Break-in oil change
Installing the Valve Lever
1.
Thread the lever into the pump selector valve
(Fig. 3).
Note:
The lever should be installed with the
bend toward the operator.
2.
Tighten the jam nut on the lever to lock it in
position.
1
m–3883
Figure 3
1.
Pump selector lever
Activating the Battery
The traction unit is shipped with a dry battery. Bulk
electrolyte with 1.260 specific gravity must be
purchased from a local battery supply outlet.
1.
Remove the hood; refer to Removing the Hood,
page 26.
2.
Remove the wing nuts and bar securing the
battery (Fig. 4).
3
5
1
m–4391
2
4
Figure 4
1.
Battery
2.
Bar
3.
Positive cable
4.
Rubber cover
5.
Negative cable
Summary of Contents for Dingo 322
Page 8: ...Safety 6 Slope Chart...
