6.
Tighten the wing nut to secure the wheel.
Replacing the Skid Plate
If the skid plate becomes worn or damaged, replace
it; contact your authorized Toro distributor.
1.
Ensure that the battery is removed from the
machine.
2.
Remove the 2 screws securing the skid plate to
the edger (
).
g344651
Figure 16
1.
Skid plate
2.
Screws
3.
Replace the skid plate and secure it using the 2
screws removed previously.
Storage
Important:
Store the tool, battery pack, and
charger only in temperatures that are within the
appropriate range; refer to
Specifications (page
.
Important:
If you are storing the battery pack for
the off-season, remove the battery pack from the
tool and charge the battery pack until 2 or 3 LED
indicators turn green on the battery. Do not store
a fully charged or fully depleted battery. When you
are ready to use the tool again, charge the battery
pack until the left indicator light turns green on
the charger or all 4 LED indicators turn green on
the battery.
•
Disconnect the product from the power supply
(i.e., remove the plug from the power supply or the
battery pack) and check for damage after use.
•
Do not store the tool with the battery pack installed.
•
Clean all foreign material from the product.
•
When not in use, store the tool, battery pack, and
battery charger out of the reach of children.
•
Keep the tool, battery pack, and battery charger
away from corrosive agents, such as garden
chemicals and de-icing salts.
•
To reduce the risk of serious personal injury, do
not store the battery pack outside or in vehicles.
•
Store the tool, battery pack, and battery charger
in an enclosed clean, dry area.
Preparing the Battery Pack
for Recycling
Important:
Upon removal, cover the terminals of
the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the
battery pack or remove any of its components.
Lithium-ion battery packs labeled with the
Call2Recycle seal can be recycled at any
participating retailer or battery recycling
facility in the Call2Recycle program (US
and Canada only). To locate a participating
retailer or facility closest to you, please call
1-800-822-8837 or visit www.call2recycle.org.
If you cannot locate a participating retailer or
facility nearby, or if your rechargeable battery
is not labeled with the Call2Recycle seal,
please contact your local municipality for more
information on how to responsibly recycle the
battery. If you are located outside of the US
and Canada, please contact your authorized
Toro distributor.
15
Summary of Contents for Flex-Force Power System 51833
