Specifications
Model
51841
Cutting
Length
610 mm (24 inches)
Rated
Voltage
60V DC maximum, 54 VDC nominal usage
No-load
Speed
3200 spm at 60 VDC max
Cutting
width
19 mm (3/4 inch)
Charger
Type
88602 or 88610 (included with 51841)
Battery Type
88620 (included with 51841), 88625, 88640,
88660, or 88675
Appropriate Temperature Ranges
Charge/store the battery pack
at
5°C (41°F) to 40°C (104°F)*
Use the battery pack at
-30°C (-22°F) to 49°C (120°F)*
Use the machine at
0°C (32°F) to 49°C (120°F)*
*Charging time will increase if you do not charge the
battery pack within this range.
Store the machine, battery pack, and battery charger
in an enclosed clean, dry area.
Operation
Starting the Hedge Trimmer
1.
Remove the protective cover from the blades
(
).
WARNING
The hedge trimmer blades can cause
cuts or amputation.
Be careful when handling the hedge
trimmer with the protective cover
removed.
g308414
Figure 4
1.
Protective cover
2.
Blades
2.
Make sure that the vents on the hedge trimmer
are clear of any dust and debris.
3.
Align the cavity of the battery pack with the
tongue in the handle housing, grasp the handle,
and push the battery pack into the handle until
the latch locks into place (
).
g308413
Figure 5
1.
Auxiliary-handle switch
4.
Trigger
2.
Auxiliary handle
5.
Battery latch
3.
Lock switch
6.
Hedge trimmer venting
areas
4.
Place 1 hand on the trigger handle. Place the
other hand on the auxiliary handle (
9