Loading the Machine
WARNING
Loading a machine onto a trailer or truck
increases the possibility of tip-over and could
cause serious injury or death.
•
Use extreme caution when operating a
machine on a ramp.
•
Back the machine up the ramp and walk it
forward down the ramp.
•
Avoid sudden acceleration or deceleration
while driving the machine on a ramp as
this could cause a loss of control or a
tip-over situation.
1.
If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2.
If applicable, connect the trailer brakes and
lights.
3.
Lower the ramp (
4.
Raise the platform.
Important:
Always keep the platform up
when loading and unloading the machine.
5.
Back the machine up the ramp (
g031405
Figure 30
1.
Back the machine up the
ramp.
2.
Walk the machine down
the ramp.
6.
Shut off the engine, remove the key, and engage
the parking brake.
7.
Tie down the machine near the front caster
wheels and the rear bumper with straps, chains,
cable, or ropes (
). Refer to local
regulations for tie-down requirements.
g302615
Figure 31
1.
Tie-down loops
24
Summary of Contents for GrandStand 72504TE
Page 58: ...Schematics g302050 Electrical Schematic 140 1878 Rev A 58 ...
Page 59: ...Notes ...