Traction Pedals
Press the forward-traction pedal to move forward. The
ground speed depends on how far you press the pedal. For
maximum speed, fully press the pedal with the throttle in the
F
AST
position.
Press the reverse-traction pedal to move rearward. To stop
the machine, reduce your foot pressure on the traction pedal
and allow the pedal to return to neutral.
g014420
1 2
g014420
Figure 8
1.
Reverse-traction pedal
2.
Forward-traction pedal
Cutting-Unit Drive Switch
Always put the cutting unit drive switch in the O
FF
position
when travelling between work areas.
Adjustable-Steering Column
WARNING
The operator may lose control causing injury or
property damage if the steering column adjuster
mechanism is not in good working order.
Never operate the mower without first checking that
the steering column adjuster mechanism is in good
working order and that, once adjusted and locked,
the steering wheel remains securely in position.
Adjust the steering wheel and steering column only when the
mower is at a standstill with the parking brake engaged.
1.
To tilt the steering wheel, press the foot pedal down.
2.
Position the steering tower to the most comfortable
position and release the pedal (
).
G014549
g014549
Figure 9
Operator Seat
WARNING
Adjustment of the seat mechanisms should only be
carried out when the mower is at a standstill with
the parking brake engaged.
Fore/Aft Adjustment:
The seat-adjustment lever allows you
to adjust the seat forward and rearward (
Operator weight adjustment:
Rotate the handle clockwise
to increase suspension stiffness and counter-clockwise to
decrease it (
10
Summary of Contents for Groundsmaster 3400
Page 49: ...Notes...
Page 50: ...Notes...
