3.
Press button 3 (raise) or button 4 (lower) to
adjust the percent of sprayer-pump flow used for
tank agitation (
).
4.
Press button 5 to save your setting, exit the Tank
screen, and return to the Main screen.
Adjusting the Units of Measure
1.
At the Settings screen, press button 2 to
navigate to the Display option, and then press
button 4 to select the Display.
2.
At the Display menu screen, press buttons 1 or
2 navigate to the Units option and then press
button 4 to select Units (
g035346
Figure 27
3.
Press buttons 1 or 2 to navigate to the desired
unit of measure and then press button 4 to
select a unit of measure.
•
English:
mph, gallons, acre
•
Turf:
mph, gallons, 1000 ft²
•
SI (metric):
kph, liter, hectare
4.
Press button 5 to save your setting, exit the
Units screen, and return to the Main screen.
Adjusting the Display Backlighting and
Contrast
1.
At the Settings screen, press button 2 to
navigate to the Display option, and then press
button 4 to select the Display.
2.
At the Display menu screen, press button 2 to
navigate to the Backlight option or the Contrast
option (
).
g034287
Figure 28
3.
Press button 3 (raise) or button 4 (lower) to
adjust the amount of backlighting or amount of
contrast for the LED display (
4.
Press button 5 to save your setting, exit the
Backlight screen or Contrast screen, and return
to the Main screen.
Setting the Security for Protected Menu
Options
Note:
The protected menus allows you to selected
menu options to be secure with the PIN.
1.
Press button 2 on the Display settings to
navigate to the Protected Menus option, then
press button 4 to select Protected Menus (
g034288
Figure 29
34
Summary of Contents for Multi Pro 5800-D
Page 74: ...Spray System Schematic g034336 Figure 95 74 ...
Page 89: ...Notes ...
Page 90: ...Notes ...