Stopping the Trimmer
To stop the trimmer, release the trigger.
Removing the Battery Pack
from the Trimmer
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine (
Figure 8
).
g192774
Figure 8
1.
Battery latch
Charging the Battery Pack
Important:
Read all safety precautions.
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Specifications (page 9)
.
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1.
Make sure that the vents on the battery pack are
clear of any dust and debris.
2.
Line up the cavity in the battery pack (
Figure 9
)
with the tongue on the charger.
g192748
Figure 9
1.
Battery pack cavity
4.
Battery-charge-indicator
button
2.
Battery pack terminals
5.
LED indicators (current
charge)
3.
Battery pack venting areas
3.
Make sure that the vents on the battery charger
are clear of any dust and debris.
4.
Slide the battery pack into the charger until it is
fully seated (
Figure 10
).
g194423
Figure 10
1.
Charger venting areas
3.
Right indicator light
2.
Left indicator light
5.
To remove the battery pack, slide the battery
backward out of the charger.
6.
Refer to the following table to interpret the LED
indicators on the battery charger.
10
