EN–12
parts away from the cutting blade area whenever the
mower’s engine is running, and keep bystanders away
as well.
Should you require further information or assistance,
feel free to contact us at:
The Toro Company
Attn: Consumer Service Department
8111 Lyndale Avenue South
Bloomington, MN 55420–1196
(612) 888–8801
If you purchased the optional Rear Bagging Kit, the
grass bag can be used for an additional test to check
the Blade Brake Clutch mechanism.
1.
Install the empty grass bag on the discharge
tunnel.
2.
Start the engine.
3.
Push the control bar (Fig. 14) down to the lowest
position.
4.
Lift the control bar to the normal “blade engaged
position, about one inch below the handle. The
bag should begin to inflate which indicates the
blade is engaged and rotating.
5.
Release control bar. If the bag does not
immediately deflate, it indicates the blade is still
rotating. Deterioration of the Blade Brake Clutch
mechanism may have set in, which could result
in an unsafe operating condition. Have mower
inspected by an Authorized TORO Service
Dealer.
Summary of Contents for Recycler SR-21OSB
Page 100: ......
