EN–13
Maintenance
NOTICE:
Maintenance, replacement or repair
of the emission control devices and
systems may be performed by any
nonroad engine repair establishment
or individual. However, to obtain no
charge repairs under the terms and
provisions of the Toro warranty
statement, any service or emission
control part repair or replacement
must be performed by an
Authorized Toro Service Dealer.
Recommended Maintenance Schedule
Continued safe and dependable operation requires routine maintenance.
Service Item
Service Operation
After
every
use
5
Hours
25
Hours
50
Hours
100
Hours
Housing
Clean built-up grass clippings and dirt.
X
Fasteners
Check blade and engine mounting
fasteners frequently. Keep all nuts, bolts
and screws tight to be sure the mower is
in safe working condition.
X
Lubrication
Grease rear grease fittings.
X
Spark Plug
Inspect every 25 hours and replace if
necessary. Replace after every 100
operating hours or once a season.
X
Cleaning
Under BBC
Shield
Remove BBC shield and brush or blow
out debris from inside of shield and
around all parts.
X
Engine Oil
Drain and refill engine crankcase with
fresh oil after first 5 hours of operation.
Thereafter, change every 50 hours.
Change oil every 25 hours when
operating under heavy load or in high
temperatures.
X
Blade
Sharpen or replace; maintain more
frequently if edge is dulled quickly in
rough or sandy conditions.
X
Blade Brake
Check stopping time every 50 hours or at
start of each mowing season. Blade must
stop within three seconds of releasing
bail; if not see your Authorized Toro
Service Dealer for repair.
X
Fuel System
Check for leakage and/or deterioration of
fuel hose. Replace if necessary.
X
Summary of Contents for Recycler SR-21OSB
Page 100: ......
