To stop, reduce foot pressure on the traction pedal and
allow it to return to the center position. On extreme
downhill slopes, apply pressure to the REVERSE side
of the pedal, or operate with your heel on REVERSE
and your toe on the FORWARD portion of the pedal.
Figure 10
1.
Seat adjusting lever
2.
Seat adjusting knob
Speed Selector (Fig. 11)—The cam lever at the side
of the traction pedal can be rotated to maintain desired
speed. Rotating the lever forward decreases speed.
Rotating it backward increases speed.
Figure 11
1.
Traction pedal
2.
Speed Selector
3.
Axle shift lever
4.
Lockout knob
Axle Shift Lever (Fig. 11)—Located on the right side
of the console, the lever selects the front drive mode.
Pull out the lockout knob and move the lever rearward
for mowing operation. Move it forward for transport
operation, then release the knob to lock your selection.
The middle position (N) is for towing.
CAUTION: The machine must be on a flat surface
with its brakes engaged when shifting the axle from
the HI to LO position.
Figure 12
1.
Brake pedals
2.
Parking brake latch
3.
Steering wheel tilt lever
Brake Pedals (Fig. 12)—Two foot pedals at the lower
left operate individual wheel brakes for turning assis-
tance, parking and to aid in obtaining better sidehill
traction. The locking pin is for parking.
Parking Brake Latch (Fig. 12)—A knob on the left
side of the console actuates the parking brake lock. To
engage the parking brake, connect the pedals with the
locking pin, push down on both pedals and pull the
parking brake latch out. To release the parking brake,
depress both pedals until the parking brake latch
retracts.
Steering Wheel Tilt Lever (Fig. 12)—This lever on
the left side of the console lets you adjust the steering
wheel for your comfort.
Transport Latches (Fig. 13)—Three latches secure
16
Controls
➀
➁
➀
➂
➃
➁
➀
➂
➁