Thank you for purchasing SMRT Logic™, a SMRTscape™ device. The SMRT Logic Wireless Gateway
allows users to intuitively set up and control their irrigation systems from anywhere they have internet access
via the web or the SMRTscape app.
Connect Hardware
1
1. Connect Ethernet cable from your internet router
or switch to the port on the back of the SMRT
Logic.
2. Plug in the AC adapter.
3.
SMRT Logic lights flash. Left LED should
eventually settle on solid green.
Solid Green -
connected to the internet
Red
-
no internet connection
Green -
flashes when data is
transferring to and from
the
controller.
Additional LED color related information can
be found in the Troubleshooting section of this
document.
Register
2
1. Next, register your SMRT Logic.
Point browser to
www.smrtscape.com
.
2. Click the
Register
link.
3.
Fill out all fields and press
Register
.
4.
A verification email will be sent to the specified
e-mail address. Click the verification link in the
e-mail. You will be taken to the SMRTscape
website.
Click the
Complete Registration
button.
5. You will be taken to the sign in page.
Enter e-mail address and password
then click
Sign In
.
Setup in 4 Easy Steps!
SMRT Logic
Quick Reference Setup Guide
SMRT Logic
™
Quick Reference Setup Guide
Models: SMRT-T, SMRT-I
Models: SMRT-T, SMRT-I
©2016
The
Toro
Company
Form
Number
373-0875
Rev.
B
