Form No. 3360-532 Rev A
Mulch Plug Lock Kit
21in Super Recycler
®
Walk-Behind Lawn Mower
Model No. 115-8416
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
Lock
1
Install the lock.
2
No parts required
–
Use the mulch plug lock.
1
Installing the Mulch Plug Lock
Parts needed for this procedure:
1
Lock
Procedure
Remove and discard the spring tab on the mulch plug,
and install the lock as shown in Figure 1.
Figure 1
1.
Mulch plug
3.
Spring tab
2.
Screw
4.
Lock
2
Using the Mulch Plug Lock
No Parts Required
Procedure
1. Rotate the lock counterclockwise on the mulch plug
to the unlocked position (Figure 2).
Figure 2
1.
Lock
2. Lift the rear door.
3. Insert the mulch plug into the opening at the rear of
the mower housing until it snaps into place.
4. Rotate the lever lock clockwise into the locked
position (Figure 3).
© 2008—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
