During Operation
Starting the Machine
1.
Ensure that the battery pack is installed in the machine; refer to
Installing the Battery Pack (page 16)
.
Note:
If the battery-compartment lid does not close completely, the battery is not fully installed.
2.
Insert the electric-start button into the electric-start switch (A of
3.
Squeeze the blade-control bar and hold it to the handle (B of
).
4.
Press the electric-start button and keep it pressed until the motor starts (C of
).
g370586
Figure 15
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (
).
g336401
Figure 16
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.
20
Summary of Contents for Super Recycler 21566
