Operating the Key Switch
1.
Turn the key to the S
TART
position (
Note:
When the engine starts, release the key.
Important:
Do not engage the starter motor
for more than 5 seconds at a time. If the
engine fails to start, wait 10 seconds between
attempts. Failure to follow these instructions
can burn out the starter motor.
Note:
You may need multiple attempts to start
the engine when you start it the first time after
the fuel system has been without fuel completely.
g008947
Figure 21
2.
Turn the key to the S
TOP
position to shut off the
engine.
Starting the Engine
Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
g189354
Figure 22
Shutting Off the Engine
1.
Disengage the blades by moving the
blade-control switch to the O
FF
position (
2.
Engage the parking brake; refer to
Parking Brake (page 20)
.
3.
Move the throttle control to the F
AST
position.
4.
Turn the key to the O
FF
position and remove
the key.
22
