background image

2

All Rights Reserved

Printed in the USA

W

 2005 by The Toro Company

8111 Lyndale Avenue South
Bloomington, MN  55420-1196

Contents

Page

Introduction

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety and Instruction Decals

3

. . . . . . . . . . . . . . . . . 

Setup

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Loose Parts

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installing the Front Weight

4

. . . . . . . . . . . . . . . . . . . 

Installing the Quick Attach Bracket

5

. . . . . . . . . . . . 

Assembling the Bagger

5

. . . . . . . . . . . . . . . . . . . . . 

Installing the Bagger Assembly

6

. . . . . . . . . . . . . . . 

Installing the New Pivot Rod

6

. . . . . . . . . . . . . . . . . 

Installing the Blades for Model 79214 Only (42 inch

Mower)

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installing the Chute and Discharge Tube

7

. . . . . . . . 

Installing the Decal on International Models Only

8

Removing the Bagger

8

. . . . . . . . . . . . . . . . . . . . . . . 

Operation

9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Emptying the Grass Bags

9

. . . . . . . . . . . . . . . . . . . . 

Clearing Obstructions from the Bagger

10

. . . . . . . . . 

Operating and Bagging Tips

10

. . . . . . . . . . . . . . . . . 

Maintenance

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Recommended Maintenance Schedule

11

. . . . . . . . . 

Inspecting the Bagger Attachment

12

. . . . . . . . . . . . . 

Inspecting the Mower Blades

12

. . . . . . . . . . . . . . . . . 

Caring for the Grass Bags

12

. . . . . . . . . . . . . . . . . . . 

Cleaning the Bagger Attachment

12

. . . . . . . . . . . . . . 

Storing the Bagger Attachment

12

. . . . . . . . . . . . . . . 

The Toro Total Coverage Guarantee

16

. . . . . . . . . . . . . . 

Introduction

Read this manual carefully to learn how to operate and

maintain your product properly. The information in this

manual can help you and others avoid injury and product

damage. Although Toro designs and produces safe

products, you are responsible for operating the product

properly and safely.

Whenever you need service, genuine Toro parts, or

additional information, contact an Authorized Service

Dealer or Toro Customer Service and have the model and

serial numbers of your product ready. Figure 1 illustrates

the location of the model and serial numbers on the

product.

1

1375

Figure 1

1. Location of the model and serial numbers

Write the product model and serial numbers in the space

below:

Model No.

Serial No.

This manual identifies potential hazards and has special

safety messages that help you and others avoid personal

injury and even death. 

Danger

Warning

, and 

Caution

 are

signal words used to identify the level of hazard. However,

regardless of the hazard, be extremely careful.

Danger

 signals an extreme hazard that 

will 

cause serious

injury or death if you do not follow the recommended

precautions.

Warning

 signals a hazard that 

may 

cause serious injury or

death if you do not follow the recommended precautions.

Caution

 signals a hazard that may cause minor or moderate

injury if you do not follow the recommended precautions.

This manual uses two other words to highlight information.

Important

 calls attention to special mechanical

information and 

Note:

 emphasizes general information

worthy of special attention.

Summary of Contents for TimeCutter Z 79214

















Reviews: