4
Setup
Note:
Determine the left and right sides of the machine from the normal operating position.
Loose Parts
DESCRIPTION
QTY.
USE
Weight
Bolt, 3/8 x 2-1/4 inch
Locknut, 3/8 inch
Washer, 3/8 inch
1
2
2
4
Installing the front weight
Bagger Quick Attach Bracket
Bolt, 3/8 x 1 inch
Locknut, 3/8 inch
Washer, 3/8 inch
1
4
4
4
Installing the quick attach bracket
Frame assembly
Bagger cover
Locknuts, 1/4 inch
1
1
2
Assembling the bagger
Bagger
Grass Bag
1
2
Installing the bagger assembly
Pivot rod
Nut
1
1
Installing the new pivot rod
High lift blade
2
Installing the new blades for model 74214 only
Chute
Discharge tube
1
1
Installing the chute and discharge tube
Decal
1
Installing the decal on International units only
Installing the Front Weight
The bagger adds a lot of weight to the rear of the
machine and may cause an unstable condition
which could result in a loss of control.
•
Install the front weight.
Caution
Installing the front weight procedure can be done at
anytime during the setup.
1.
Lift up the footrest and temporarily remove it from the
machine (Fig. 2).
m–6423
1
3
2
3
Figure 2
1. Footrest
2. Rod
3. Hole positions