Problem
Possible Cause
Corrective Action
1. The blade(s) is not sharp.
1. Sharpen the blade(s).
2. A cutting blade(s) is/are bent.
2. Install a new cutting blade(s).
3. The mower is not level.
3. Level the mower from side-to-side and
front-to-rear.
4. An anti-scalp wheel is not set correctly.
4. Adjust the anti-scalp wheel height.
5. The underside of the mower is dirty.
5. Clean the underside of the mower.
6. The tire pressure is incorrect.
6. Adjust the tire pressure.
Uneven cutting height.
7. A blade spindle is bent.
7. Contact an Authorized Service Dealer.
1. The drive belt is worn, loose or broken.
1. Install a new drive belt.
2. The drive belt is off of the pulley.
2. Install the drive belt and check the
adjusting shafts and belt guides for the
correct position.
3. The Power Take-Off (PTO) switch or
PTO clutch is faulty.
3. Contact an Authorized Service Dealer.
The blades do not rotate.
4. The mower belt is worn, loose, or
broken.
4. Install a new mower belt.
51
Summary of Contents for TimeCutter ZS 4200
Page 52: ...Schematics G014644 Electrical Diagram Rev A 52 ...
Page 53: ...Notes 53 ...
Page 54: ...Notes 54 ...