5.
Pump grease into the fittings until grease begins to
ooze out of the bearings.
Engine Maintenance
Servicing the Air Cleaner
Note:
Service the air cleaner more frequently (every few
hours) if operating conditions are extremely dusty or sandy.
Removing the Element
1.
Park the machine on a level surface and disengage the
blade-control switch (PTO).
2.
Move the motion-control levers to the brake position,
stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3.
Clean around the air-cleaner cover to prevent dirt from
getting into the engine and causing damage.
4.
Lift the cover and remove the hose clamp securing the
air-cleaner assembly to the engine (
5.
Loosen the hose clamp and remove the paper element
(
).
G014908
1
2
3
Figure 37
1.
Cover
3.
Hose clamp
2.
Paper element
Cleaning the Paper Element
Service Interval:
Every 100 hours—Service the paper
element (more often in dusty, dirty
conditions).
Every 200 hours/Yearly (whichever comes
first)—Replace the paper element (more often in
dusty, dirty conditions).
1.
Lightly tap the element on a flat surface to remove dust
and dirt.
2.
Inspect the element for tears, an oily film, and damage
to the seal.
34
Summary of Contents for timecutter zs 4200t
Page 55: ...Schematics Electrical Diagram Rev A 55 ...
Page 56: ...Notes 56 ...
Page 57: ...Notes 57 ...
Page 58: ...Notes 58 ...
