RainSensor Component Overview
Receiver Module
1
-Weather-resistant Cover - Provides protection
from rain and dust. (Keep closed when not
using the receiver).
2
-Setup Button - Accesses the various setup
and operating features.
3
-Smart Bypass
TM
Button - Pressed to bypass
sensor control after it has been activated.
4
-Antenna - Position antenna straight up for
optimum signal reception.
5
-Liquid Crystal Display (LCD) - Provides visual
reference for setup and operation.
6
-Rain and Freeze Sensor Status Indicators -
Illuminate when the RainSensor is active and
watering is on hold.
7
-Water Conservation LED’s - Indicate the water
conservation level selected.
9
-Adjust Button - Pressed to adjust or select values within the setup and oper-
ating features.
10
- Connection Cable - Multi-wire cable for connection to controller.
Sensor Module
1
-Test Spindle - Pressed to manually activate
the RainSensor system.
2
-Rain Threshold Adjustment - Adjustable cap
enables the rainfall threshold to be set for
1/8",1/4",1/2"or 3/4" of accumulated rainfall
before the sensor is activated.
3
-Quick-Clip
TM
Mounting Bracket - Simplifies
installation of the sensor module to a rain
gutter, edge of roof, fence post, etc.
4
-Antenna Wire - Position antenna straight down
for optimum signal transmission.
2
2
4
5
6
7
8
9
3
1
2
4
10
3
1
Figure 1
Figure 2
Doc 5 12/21/04 6:36 PM Page 2
