COMMANDER XT1000 / XT2000
User Manual
Rev 1.06
8 |
P a g e
RESETTING THE COMMANDER
Resetting
In addition to on (Resume) and Off (Suspend) functions, COMMANDER
XT1000 mobile computers provide a range of device reset (boot)
procedures whose functions may be called upon when required.
IMPORTANT NOTE!
Some device reset options irretrievably delete stored user data! Always
read and understand the parameters of selected reset procedures
before execution.
On (Resume) / Off (Suspend) and Reset Functions
On
(Resume)
/ Off
(Suspend)
To Suspend or Resume COMMANDER XT1000 mobile computer operation:
—
Press the
Red Power key
once to suspend operation and press again to resume.
Reset the COMMANDER XT1000
To Soft Reset (or Warm Boot):
A soft reset restarts the device and reboots the operating system. Applications and
files remain intact. However, any data in RAM that has not been saved could be
lost. Make sure to save any open work before executing a soft reset.
To perform a soft reset:
1.
Press the Power button and hold for 3 seconds.
2.
Choo
se ‘Soft Reset’ on the power
menu.
To Hard Reset (or Cold Boot):
A hard reset, resets the hardware and cold starts the operating system. All applications
and files remain but any unsaved data in RAM will be lost. Make sure to save all open
work before executing a hard reset.
To perform a hard reset:
1.
Press the Power button and hold for 3 seconds.
2.
Choose ‘Hard Reset’ on the power
menu.
