Care and service
9.3 Maintenance intervals
Servicing is to be carried out only by Torqeedo Service or authorised service partners, according to elapsed time or operating hours, as specified. The activities before each use
and the change of anodes can be carried out independently.
If the prescribed maintenance intervals are not complied with or documented, this leads to loss of warranty. Ensure that the services carried out are documented in your ser-
vice check folder.
Service activities
Before each use
Every 6 months or after 100 oper-
ating hours
Every 5 years or after 700 operat-
ing hours (whichever occurs first)
Batteries and battery cables
■
Confirm full insulation
■
Visual inspection
■
Secure against slipping and tipping
over
■
Check that threaded cable connec-
tions are screwed tight
Other screws and bolts on the
Cruise system
■
Check tight fit
Cable connections
■
Confirm full insulation
■
Check that threaded cable connec-
tions are screwed tight
Electronic accelerator lever
■
Check stability
■
Check functioning
O-rings
To be checked by a certified service
partner
Gear shaft
■
Visual inspection
To be checked by a certified service
partner
Galvanic anodes
■
Visual inspection
Replace as complete sets
page 106 / 121
