- Make sure voltage and plug of charger correspond to local standards.
- Battery pack and charger are matched for safety reasons.
Do not use other devices. This might cause explosions!
- Do not leave charging unattended.
- Depending on how long the tank is operated, battery pack may
become very hot. Allow battery to cool down for at least 30 minutes
before charging it in order to prevent damage.
- Do not cover battery pack durin charging process and always keep
battery away from flammable materials.
- Do not throw battery pack into open fire: explosion hazard!
- A heat development generated in the battery and the charger during
charging is normal when charging is done properly!
- Failure to comply with these notes may result in defects to the battery!
- Lithium batteries must not be used!
Not inserting batteries with
the correct polarity may
cause battery leakage or
device malfunction.
Do not use different types
of batteries together.
This may result in battery
leakage and burn injuries.
Warning
Warning
Remove batteries from the
remote control if it will not
be used for a long period
of time.
Batteries can leak (acid).
Environmental protection:
Return used batteries to
known collection points.
Warning
Warning
1.
Loosen the screws of the battery compartment cover using a screwdriver.
Remove the cover.
2.
Insert the batteries and make sure that the +/- polarity is correct.
3.
Slide the cover back on and fix it with the screw.
Remote control
ON/OFF Sequence for Devices:
When turning on power, turn on remote control first then the tank.
Sequence for turning off power is vice versa.
BATTERY PACK
CAUTION AND SAFETY NOTES
Warning
BATTERIES
CAUTION AND SAFETY NOTES
Tiger I / T-34/85
-6-
English
