164
WinDVD
Customizing WinDVD
5.375 x 8.375 ver 2.3
enable specific content to be viewed in a specific region. The
current region code of the WinDVD player installed in your
computer is Region 1, comprising the United States and
Canada.
NOTE: Most DVD-ROM drives let you change the region code,
usually between one and five times. Once a drive has reached the
limit, the region code cannot be changed again. Pay careful
attention to the
Remaining times until permanent
box on the
General properties tab.
1
To change the region code, select the desired option in
the
Current regions list
.
The
Remaining times until permanent
box displays the
remaining number of times you can change the current
region before the setting becomes permanent.
2
In the
Player settings Default DVD drive
box, select
your DVD-ROM drive letter.
3
Select the
Player settings Auto play
check box to enable
the auto play feature. Clear the check box to disable this
feature.
When enabled, the auto play feature automatically
launches a DVD-ROM when it is inserted in the DVD-
ROM drive.
4
In the
View
box, select the items you want to display
when WinDVD launches.
Tool bar
is the bar containing basic player functions that
is displayed at the top of the WinDVD video window.
Status bar
is the bar that is displayed at the bottom of the
WinDVD video window.
Player
is the WinDVD control panel.
5
Click
OK
to save your settings.
