56
Getting Started
Turning off the computer
5.375 x 8.375 ver 2.3
11
Click
Next
.
The operating system prompts you to print a test page.
12
If your printer is connected and turned on, click
Next.
To complete the setup procedure without printing a test
page, click
No
, then click
Next
.
13
Click
Finish
.
You are now ready to print.
Depending on your program, you may see various
messages indicating the status of your print job.
Turning off the computer
It is a good idea to turn off your computer when you are not
using it for a while.
If you are using the computer for the first time, leave the
computer plugged into a power source (even though the
computer is off) to fully charge the main battery. With the
computer off, it may take up to three hours to recharge the
main battery.
Guidelines for turning off the computer:
❖
If you have work in progress and are not connected to a
network, use the Windows
®
Standby command to save
your system settings to memory so that, when you turn
on the computer again, you will automatically return to
where you left off.
❖
To leave the computer off for a longer period, you can use
the Windows
®
Turn Off command when not connected to
a domain server or the Shut down when connected to a
domain server instead.
CAUTION: Never turn off the computer while any drive is in use.
Doing so may damage the media in use and result in loss of data.
