56
Getting Started
Turning off the computer
5.375 x 8.375 ver 2.3
11
Click
Next
.
The operating system prompts you to print a test page.
12
If your printer is connected and turned on, click
Next.
To complete the setup procedure without printing a test
page, click
No
, then click
Next
.
13
Click
Finish
.
You are now ready to print.
Depending on your program, you may see various
messages indicating the status of your print job.
Turning off the computer
It is a good idea to turn off your computer when you are not
using it for a while.
If you are using the computer for the first time, leave the
computer plugged into a power source (even though the
computer is off) to fully charge the main battery. With the
computer off, it may take up to several hours to recharge the
main battery.
Guidelines for turning off the computer:
❖
To leave the computer off for a longer period, use the
Windows
®
Turn Off command. Alternatively, use
Hibernation mode to save the system settings to the hard
disk.
❖
If you have work in progress and are not connected to a
network, you can use the operating system Standby
command to save your system settings to memory so that,
when you turn on the computer again, you automatically
return to where you left off.
❖
Never turn off the power while a drive-in-use light on the
system indicator panel is on. Doing so may damage your
media or drive.
