background image

52

Limited United States Warranty
LCD TV/DVD  Combination—Repair Warranty

Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original
consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUD-
ING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.

PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.

Limited One (1) Year Warranty on Parts and Labor*

TACP warrants this LCD TV/DVD Combination and its
parts against defects in materials or workmanship for
a period of one (1) year after the date of original retail
purchase. DURING THIS PERIOD, TACP WILL, AT
TACP’S OPTION, REPAIR OR REPLACE A DEFEC-
TIVE PART, WITH A NEW OR REFURBISHED PART,
WITHOUT CHARGE TO YOU. YOU MUST CONTACT
TOSHIBA’S CONSUMER SOLUTIONS CENTER
FOR INSTRUCTIONS ON HOW TO PROCESS
YOUR IN WARRANTY REPAIR REQUEST. THE
CONSUMER IS RESPONSIBLE FOR ALL INBOUND
TRANSPORTATION AND INSURANCE CHARGES
FOR THE LCD TV/DVD COMBINATION TO THE
REPAIR CENTER.

*Rental Units

The warranty for rental units begins on the date of
the first rental or thirty (30) days from the date of
shipment to the rental firm, whichever comes first.

*Commercial Units

LCD TV/DVD Combination units sold and used for
commercial purposes have a limited warranty for all
parts and labor, which warranty begins on the date of
original retail purchase and ends on the date that is
ninety (90) days thereafter.

Owner’s Manual and Product Registration Card

Read this owner’s manual thoroughly before operating
this LCD TV/DVD Combination. Complete and mail
the enclosed Product Registration Card or register
your product on-line at www.tacp.toshiba.com/service
as soon as possible. By registering your product
you will enable TACP to bring you new products
specifically designed to meet your needs and help
us contact you in the unlikely event a safety
notification is required under the Consumer Product
Safety Act. Failure to complete and return the
Product Registration Card does not diminish your
warranty rights.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:

(1) You must provide your bill of sale or other proof

of purchase.

(2) All warranty servicing of this LCD TV/DVD

COMBINATION must be made by an Authorized
TACP Service Station.

(3) These warranties from TACP are effective only if

the LCD TV/DVD COMBINATION is purchased
and operated in the U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, set up,

adjustment of customer controls and installation
or repair of antenna systems are not covered by
these warranties. Reception problems caused by
inadequate antenna systems are your
responsibility.

(5) Warranties extend only to defects in materials or

workmanship as limited above and do not extend
to any LCD TV/DVD COMBINATION or parts
which have been lost or discarded by you or to
damage to LCD TV/DVD COMBINATION or parts
caused by fires, misuse, accident, Acts of God,
such as lightning or fluctuations in electric power,
improper installation, improper maintenance or
use in violation of instructions furnished by TACP;
use or malfunction through simultaneous use of
this product and connected equipment; or to
units which have been modified or had the
serial number removed, altered, defaced or
rendered illegible.

J5N00621A [E] (P52-Back)

14/01/2005, 7:43 PM

52

Summary of Contents for 14DLV75























































Reviews: