28
TV operation
4
Press
or
to select the desired picture
mode, then press ENTER.
3
PICTURE PREFERENCE
STANDARD
SPORTS
MOVIE
MEMORY
/
/ ENTER / MENU
After your desired setting press MENU
repeatedly until the menu screen is cleared.
Press
or
to select “PICTURE”, then press
.
1
2
Press MENU, then press
or
to select
option.
After your desired setting press MENU
repeatedly until the menu screen is cleared.
4
Note:
The CONTRAST default setting is set to maximum
(+32) at the factory.
Picture control adjustment/
Adjusting the picture preference
Picture controls are factory preset but you can adjust them individually as follows:
And also you can select four picture modes—Standard, Sports, Movie, and
Memory—as described in the following table:
Press
or
to select the item you want to
adjust, then press
or
to adjust the setting.
3
Selection
Pressing
BRIGHTNESS
darker
lighter
CONTRAST
lower
higher
COLOR
paler
deeper
TINT
reddish
greenish
SHARPNESS
softer
sharper
CANCEL
/
/
/
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/
/
/
/ CANCEL / MENU
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
0
+32
0
0
0
■
To return all adjustments to the factory preset levels
Press CANCEL while making picture adjustments.
Picture control adjustment
Adjusting the picture preference
Press
or
to select “PICTURE
PREFERENCE”, then press
.
1
2
Press MENU, then press
or
to select
option.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/
/
/ MENU
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/
/
/
/ MENU
Note:
You cannot select “PICTURE PREFERENCE” in the Game
mode.
ENTER
Mode
Picture quality
STANDARD Standard picture quality (factory-set)
SPORTS
Bright and dynamic picture (factory-set)
MOVIE
Movie-like picture setting (factory-set)
MEMORY
Your personal preferences (set by you;
see “Picture control adjustment” as left)
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/
/
/ MENU
MENU
29
TV
operation
Selecting the color temperature
4
Press
or
to select the desired color
mode, then press ENTER.
3
After your desired setting press MENU
repeatedly until the menu screen is cleared.
Press
or
to select “COLOR
TEMPERATURE”, then press
.
1
2
Press MENU, then press
or
to select
option.
Mode
Picture quality
COOL
Bluish
MEDIUM
Neutral
WARM
Reddish
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/
/
/
/ MENU
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
/
/
/ MENU
COLOR TEMPERATURE
COOL
MEDIUM
WARM
/
/ENTER/MENU
/
/
/
ENTER
Selecting the color temperature
MENU
30
TV operation
Sound control adjustment/
Stereo and Second Audio Program (SAP)
Sound controls are factory preset but you can adjust them individually as follows:
The TV/DVD is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs
with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual
transmission or for other purposes.
To select desired sound
Listening to stereo sound
MONO + SAP BROADCASTING
STEREO
CH 013
Press AUDIO to select the desired sound.
SEL. STEREO
When the TV is turned on or a channel selection is
made, make certain the “STEREO” appears on the
screen. This means that Stereo broadcasting is avail-
able. You can enjoy stereo sound from the left and
right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO to change
to mono sound. The noise may be eliminated. Press it
again to return to the stereo sound.
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, make certain the SAP appears on the screen.
This means that the Second Audio Program
broadcasting is available.
MONO SOUND
(MAIN)
SAP SOUND
SAP BROADCASTING
STEREO SOUND
(MAIN)
MONO SOUND
(MAIN)
SAP SOUND
Sound control adjustment
Press
or
to select “AUDIO”, then press
.
1
2
Press MENU, then press
or
to select
option.
After your desired setting press MENU
repeatedly until the menu screen is cleared.
4
Press
or
to select the item you want to
adjust, then press
or
to adjust the setting.
3
■
To return BASS/TREBLE/BALANCE control
adjustments to the factory preset levels
Press CANCEL while making sound adjustments.
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
PICTURE
AUDIO
PICTURE PREFERENCE
COLOR TEMPERATURE
BASS
TREBLE
BALANCE
SURROUND
0
0
0
OFF
BASS:
Press
or
to adjust the bass sound.
TREBLE:
Press
or
to adjust the treble sound.
BALANCE:
Press
or
to obtain an equal sound level from
both speakers.
SURROUND:
Press
or
to select “ON” or “OFF”.
ON:
The dynamic presence and sound created offers
a thoroughly enjoyable listening experience.
OFF: Normal sound.
STEREO SAP
CH 013
CANCEL
/
/
/
MENU
AUDIO
31
Basic
playback
No Disc
Reading
Press STOP to end playback.
■
Resuming facility
• The unit records the stopped
point, depending on the disc. “
”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or un-
load the disc (“
■
” appears on the
screen.), the unit will clear the
stopped point.
On the TV-screen, “No Disc” changes to “Reading” and
then playback commences.
DVD
VCD
CD
Preparations:
• When connecting to other equipment, turn the power off.
1
Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator on the front of the main unit will light.
• Every time you press POWER, the TV/DVD starts from
TV mode.
• When using an amplifier, switch on the amplifier.
4
2
Press TV/DVD on the remote control to select DVD
mode.
The DVD startup screen will appear on the screen.
“Reading” display will change to “No Disc”. (If DVD
disc has already loaded,
playback will start
automatically.)
3
Load the disc in the disc slot.
Basic playback
Load the disc in the disc slot with the label side facing
forward. (If the disc has a label.) Hold the disc without
touching either of its surfaces, align it with the guides,
and place it in position.
Note:
When you play the 8cm disc, you need an adapter (not
supplied).
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press
/
or
/
to select title, then press
ENTER. Title is selected and play commences.
6
■
To start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the TV/DVD’s operation. In such
case, disconnect the AC cord once, then connect it again.
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc slot when disc is
loading or unloading. Neglecting to do so may cause serious
personal injury.
POWER
Basic playback
No Disc
Press or – to adjust the volume.
5
VOLUME
32
VOLUME
+/–
PLAY STOP
EJECT
