1-2
3. Turn the LCD (2) on its back and remove two screws
(4).
4. Slide the back lights (5) on the top and bottom out to
the left side and remove the LCD (2).
Fig. 1-1-5
Note:
• Return the wiring to their original position when
assembling.
1-3. Inverter PC Board
1. Remove the wire of connector (1) from the inverter PC
board holder (2) claw A.
2. Remove two screws (3).
3. Remove the connectors (4) from the four locations and
remove the wire from the three locations of claw B.
Fig. 1-1-7
4. Release four claws C, then remove the inverter PC
board holder (2) from the inverter PC board (5).
5. Remove the connector (6) from the one location, then
remove the inverter PC board (5).
Fig. 1-1-8
Note:
• Return the wiring to their original position when
assembling.
• The inverter PC board contains high voltage circuitry
and therefore the power supply plug should always be
unplugged during disassembly and assembly.
Additionally, care should be taken when servicing
while the power is on.
Rear side of the
LCD panel (2)
Screws (4)
Back light (5)
Fig. 1-1-6
Screws (3)
Wire
Claw A
Inverter PC board
holder (2)
Connector (1)
Inverter PC board
holder (2)
Connector (4)
Connector (4)
Claw B
Claw B
Wire
Inverter PC board (5)
Connector (6)
Claw C
Claw C
Claw C
Claw C
Inverter PC board
holder (2)
Summary of Contents for 15DL72
