1600XP Series Single Phase Uninterruptible Power Systems
Product Specifications – Rev 5.0 October 2013
3.6kVA – 22kVA
Page 5 of 9
Frequency Range
: 45 - 65 Hz
Power Factor
: > 0.95 lagging
Input Capacity
: 110% of UPS Output Capacity
Input Current Limit
: 125% of nominal capacity
Input Current THD
: < 5% Total Harmonic Distortion (THD)
* Based on typical 70% load. For continuous operation at -30%, de-rate the maximum operating
temperature to 90
F (32
C.)
5.2 UPS Output
Rated Voltage
: 120/208/240 VAC Single Phase
Output Voltage Requirements
: 1 Phase, 3 Wires + Ground
Output Capacity
:
kVA
kW (@ 0.85PF)
3.6 kVA
3.1 kW
6 kVA
5.1 kW
8 kVA
6.8 kW
10 kVA
8.5 kW
14 kVA
11.9 kW
18 kVA
15.3 kW
22 kVA
18.7 kW
Rated Load Power Factor
: 0.85 lagging
Efficiency
: Typical: 85%, Minimum: 83% (AC/AC)
Voltage Regulation
: +/- 3% nominal (balanced load)
Rated Frequency
: 50/60 Hz (Autosensing or manually selectable)
Frequency Regulation
: +/- 0.5, 1.0, or 1.5 Hz
Frequency Sync. Range
: +/- 1.0 Hz
Voltage Transients
: +/- 8% (100% step load change)
: +/- 3% (loss or return of input power)
Transient Voltage Recovery
: 50ms maximum to within 2% of nominal
Overload Cap. (on inverter)
: 125% for 30 sec.,
: 150% for 10 sec.
Overload Cap. (on Bypass)
: 1000% for 1 cycle
Crest Factor
: 3.0
Harmonic Voltage Distortion
: 3% THD @ 100% linear load
: 6% THD @ 100% Non-linear
Efficiency Vs. Load Table
1600EP/XP Efficiency
3.6kVA
6kVA
8kVA
10kVA
14kVA
18kVA
22kVA
100% Load
84.9%
84.9%
84.9%
84.9%
84.9%
84.9%
84.9%
75% Load
84.9%
84.9%
84.9%
84.9%
84.9%
84.9%
84.9%
50% Load
83.4%
83.4%
83.4%
83.4%
83.4%
83.4%
83.4%
25% Load
75.7%
75.7%
75.7%
75.7%
75.7%
75.7%
75.7%
