Toshiba 19AV550E, Owner'S Manual

17

Using the TV’s features

Native

Use this setting for PC connected via HDMI. 
When receiving video signal source via HDMI 
input, this setting will display the image correctly 
without distortion or picture clipping.

Notes:

•  In the antenna input signal mode, the picture 

size selections are 

Wide

, 

Super Live 2

, 

Cinema 2

, 

4:3

, 

Super Live 1

, 

Cinema 1

, 

Subtitle

 and 

14:9

.

•  In the PC input mode (

-

 page 23), the picture 

size selection is wide or normal only.

•  In the teletext mix mode (

-

 page 25), the 

picture size selection is wide or normal only.

•  Using the special functions to change the 

size of the displayed image (e.g. changing the 
height/width ratio) for the purpose of public 
display or commercial gain may infringe on 
copyright laws.

•  If the aspect ratio of the selected format is 

different from the one of the TV transmission 
or video program, it can cause a difference 
in vision. Change to the correct aspect ratio 
picture size.

•  When using the 

PC

 mode, the moving image 

quality may be deteriorated.

Using the picture still

• Press 

r

 to freeze the picture.

Even if an image is frozen on the TV screen, the 
pictures are running on the input source. Audio 
continues to be output as well.
To return to a moving picture, press 

r

 again.

( M ov i n g )

( S t i l l )

Notes:

•  If you use this function except for the purpose 

of your private viewing and listening, it may 
infringe the copyright protected by the copyright 
laws.

•  In the PC input mode (

-

 page 23), this 

function is not available.

Adjusting the picture position

Adjustment to the position of the picture may be 
made to suit your viewing preferences.

1

 Press 

MENU

, then press 

I

 or 

i

 to display the 

SETUP

 menu.

AV connection

Manual tuning

OK

OK

Auto tuning

OK

Language

SETUP

MENU

Back

Watch TV

EXIT

English

OK

Picture Position

2

 Press 

u

 or 

U

 to select 

Picture Position

.

3

 Press 

Q

, then press 

u

 or 

U

 to select an item 

you want to adjust.

Reset

Horizontal Position

MENU

Back

Watch TV

EXIT

0

Picture Position

Ver tical Position

0

OK

4

 Press 

I

 or 

i

 to adjust the settings as required.

Horizontal Position

0

Notes:

•  When the picture size is in Wide or 4:3 mode, 

only the Horizontal Position can be adjusted.

•  When the picture size is in PC mode, the 

picture position cannot be adjusted.

Resetting the picture position

This function resets your picture position settings 
to the factory settings.

1

 From the 

Picture Position

 menu, press 

u

 or 

U

 to select 

Reset

.

2

 Press 

Q

.

1926AV550ETY_EN.indd   17

1926AV550ETY_EN.indd   17

10/20/2008   1:31:13 PM

10/20/2008   1:31:13 PM