English
SETTING UP
7
Aerial cables: - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear of the television.
If you use a decoder and/or a media recorder it is essential that the aerial cable is connected through
the decoder and/or through the media recorder to the television.
SCART leads: - - - - - - - - - - - - - - - - -
Connect the video recorder
IN/OUT
or decoder
TV
socket to the television. Connect the media recorder
SAT
socket to the decoder
MEDIA REC
. socket.
Before running
Auto tuning
put your decoder and media recorder to
Standby
.
The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See page 14.)
HDMI™ (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
with digital audio and video output. It is designed for best performance with 1080i high-definition video
signals but will also accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i, 480p, 576i, 576p and
720p signals.
NOTE:
Although this television is able to connect to HDMI equipment it is possible that some equipment
may not operate correctly.
A wide variety of external equipment can be connected to the back of the television, therefore
the relevant owners manuals for all additional equipment must be referred to.
If the television automatically switches over to monitor external equipment, return to normal television
by pressing the desired programme position button. To recall external equipment, press
to select.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
Summary of Contents for 19AV603P
Page 1: ...AV60 P ANALOGUE Series ...