24
Display setup/Timer setting (DTV mode only)
Display Setup
1
Press
DIGITAL MENU
to display the Main Menu screen.
2
Press
to select “Setup” menu, then press
ENTER/CH LIST
.
3
Press
to select “Display Setup”,
then press
ENTER/CH LIST
.
The Display Setup menu appears.
4
Press
to select an item, then press
to change each setting.
5
After all the changes are made, press
EXIT/CANCEL
to return to the normal screen.
Timer Setting
If the time displayed on the Channel banner differs from the actual time, it can be corrected.
1
Press
DIGITAL MENU
to display the Main Menu screen.
2
Press
to select the “Setup” menu, then press
ENTER/CH LIST
.
3
Press
to select “Timer Setting”,
then press
ENTER/CH LIST
.
4
If the time displayed on the Channel banner differs
from the actual time, adjust the time offset with the
button until the correct time is shown.
Note:
• Normally, this would be done by selecting
“Auto”.
5
After all the changes are made, press
EXIT/CANCEL
to return to the normal screen.
/
/
/
/
Banner
timeout
1 sec, 2 sec...
7 sec.
Select how long the service
banner information appears on
the screen.
Banner
position
Top
Select whether the service
banner information appears on
the top or bottom of the screen.
Bottom
/
/
/
