13
Selecting the video input source
Notes:
• If no buttons are pressed
after approximately 5
seconds, the Main Menu
screen disappears.
• All the channels will be
deleted before the
scanning process begins.
• You can cancel the scan
process at any time by
pressing
EXIT/CANCEL
.
The carriers and the
services stored before
EXIT/CANCEL
is pressed
will be stored.
Selecting the video input source
1
Press
INPUT
to view a signal from another device connected to your TV, such as a VCR
or DVD player.
You can select each input source depending on the input jack used to connect your devices.
2
Press
or the corresponding number on the
screen to select a video input source, then
press
ENTER/CH LIST
within 5 seconds.
/
(19DV665DB/19DV667DB/
22DV665DB/22DV667DB)
(26DV665DB)
