background image

22

Other convenience functions

You can change the default settings to convenience use.

 

Main 

menu 

Selected items

Setup hint

Picture Picture 

Setting

Brightness/
Contrast/
Sharpness/
Colour/
Tint

You can adjust the picture to your preference.
The ‘Tint’ option can be selected if an NTSC 3.58 MHz or NTSC 4.43 MHz signal is 
input through one of the AV inputs, and NTSC or Auto has been selected for the 
AV Colour option.

Colour Temperature Cool/Standard/Warm

Backlight

You can use the Backlight feature to adjust the screen brightness for improved pic-
ture clarity.

Picture
Preference

Standard

Standard picture quality

Movie

Movie-like picture setting

Memory

Your personal preferences

Sports

Bright and dynamic picture

Picture size

Auto/
4:3/
Real/
16:9/
Cinema/
14:9

You can choose from six picture formats to view programmes.

Blue Back

On/Off

You can set the TV to automatically change to a blue screen and mute the sound if 
the signal is weak or absent.

PC Setting*

1

 

*1

The PC Setting option can be configured only when the TV tuner input is set to PC mode.  

Hor Position

Adjust the image position horizontally.

Ver Position

Adjust the image position vertically.

Clock

Minimize any vertical bars or stripes visible on the screen background.

Phase

This must be adjusted if the PC mode frequency has been set to 60 Hz. This will 
optimize picture quality.

Auto Adjust

Adjust all the PC settings automatically.

DNR*

2

*2

In PC mode, the DNR option cannot be selected. 

On/Off

Sometimes it is not possible to input a high-quality HD signal. The actual signal 
input is too small and noisy (e.g., a video film in letterbox format, or a noisy ana-
logue cable TV signal). DNR can slightly reduce interferences caused by the faulty 
input signal.

Reset

Select “Reset” to reset Picture Setting to the factory preset values.

Sound

NICAM

Auto/Off

See page 20.

Bass/Treble/Balance

You can adjust the sound quality to your preference.

HDMI Audio (19DV665DB/19DV667DB/ 
22DV665DB/22DV667DB)/
HDMI1 Audio (26DV665DB)

See page 56 ~ 57.

Digital Audio Output

Bitstream/PCM

You can select “Bitstream” when AC3 format is available or select “PCM” for other 
audio format. 

Reset

Select “Reset” to reset Sound settings to the factory preset values.

Channel

Auto Tuning

See page 14.

Manual Tuning

See page 16.

Ch Allocation

See page 15.

Summary of Contents for 19DV665DB




































































Reviews: