background image

41

Changing soundtrack language/Subtitles/Disc status

  

Notes:

• If the desired language is 

not heard after pressing 

the button several times, 

that language is not 

recorded on the disc.

• The soundtrack language 

selected is cancelled 

when you eject the disc. 

The initial default 

language or available 

language will be heard if 

the disc is played back 

again.

• Depending on the DVD, 

you may not be able to 

change subtitles, or to 

turn subtitles on or off.

• While playing a DVD, the 

subtitle may change when 

you loaded or eject the 

disc.

• In some cases, a selected 

subtitle language may not 

be changed immediately.

Changing soundtrack language (DVD/VCD)

You can select the soundtrack language when you play a multilingual disc.

1

Press 

AUDIO SELECT

 

 during playback. 

The current soundtrack language will appear.

  

 

2

Press 

AUDIO SELECT

 

 repeatedly until the desired 

language is selected.  
The on-screen display will disappear after a few seconds.

In case of Video CD playback

Audio type changes are as follows each time you press 

AUDIO SELECT 

.

Subtitles (DVD)

When playing back a disc recorded with subtitles, you can select the subtitle language or turn 

the subtitle off.

1

Press 

SUBTITLE

 

 repeatedly during playback until 

the desired language is selected.  

2

To turn off the subtitle, press 

SUBTITLE

 

 until ‘Off’ 

appears. The on-screen display will disappear after a few 
seconds.  

Disc status (DVD/VCD)

Press 

 to display the status of the disc. 

To close the display panel, press 

.

VCD mode

DVD mode

Press 

 

again.

2/2      D 5.1 Ch Eng

Stereo

Left

Right

Mix

1/5 Eng

Off

Elapsed/remaining 

time for disc

Elapsed/remaining 

time for current track

Track no. 

(if PBC is 

enabled, 

“PBC On” 

will be 

displayed)

Elapsed/remaining 

time for current title

Title no.

Elapsed/playback time 

for current chapter

Chapter no.

Audio type Subtitle status (if on, will show language)

Bit rate

Scene angle 

status

Summary of Contents for 19DV665DB




































































Reviews: