2-2: BRIGHTNESS CENT
2-3: CONTRAST MAX
1.
Place the set in Aging Test for more than 15 minutes.
1.
Place the set in Aging Test for more than 15 minutes.
2.
Receive the color bar pattern. (RF Input)
2.
Receive the color bar pattern. (RF Input)
3.
Using the remote control, set the brightness and
3.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
4.
Activate the adjustment mode display of
Fig. 1-1
and
4.
Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(32)
on the remote control to
press the channel button
(51)
on the remote control to
select "BRIGHTNESS CENT".
select "CONTRAST MAX".
5.
Press the LEFT/RIGHT button on the remote control
5.
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "127".
until the contrast step No. becomes "151".
6.
Check if the picture is normal.
6.
Check if the picture is normal.
7.
Receive the color bar pattern. (VIDEO Input)
7.
Receive the color bar pattern. (VIDEO Input)
8.
Using the remote control, set the brightness and
8.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
9.
Press the INPUT ZOOM button on the remote
9.
Press the INPUT ZOOM button on the remote
control to set to the AV mode. Then perform the
control to set to the AV mode. Then perform the
above adjustments 4~6.
above adjustments 4~6.
Receive the color bar pattern. (S-VIDEO Input)
10. Receive the color bar pattern. (S-VIDEO Input)
Using the remote control, set the brightness and
11. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
Press the INPUT ZOOM button on the remote
12. Press the INPUT ZOOM button on the remote
control to set to the AV(Y/C) mode. Then perform the
control to set to the AV(Y/C) mode. Then perform the
above adjustments 4~6.
above adjustments 4~6.
Receive the color bar pattern. (COMPONENT Input)
13. Receive the color bar pattern. (COMPONENT Input)
Using the remote control, set the brightness and
14. Using the remote control, set the brightness and
11.
12.
10.
ELECTRICAL ADJUSTMENTS
14.
13.
D-5
22LV610U
Us g t e e ote co t o , set t e b g t ess a d
Us g t e e ote co t o , set t e b g t ess a d
contrast to normal position.
contrast to normal position.
Press the INPUT ZOOM button on the remote
15. Press the INPUT ZOOM button on the remote
control to set to the COMPONENT mode.
control to set to the COMPONENT mode.
Activate the adjustment mode display of
Fig. 1-1
and
16. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(32)
on the remote control to
press the channel button
(51)
on the remote control to
select "BRIGHTNESS CENT".
select "CONTRAST MAX".
Press the LEFT/RIGHT button on the remote control
17. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "125".
until the contrast step No. becomes "152".
Check if the picture is normal.
18. Check if the picture is normal.
Receive the color bar pattern. (HDMI Input)
19. Receive the color bar pattern. (HDMI Input)
Using the remote control, set the brightness and
20. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
Press the INPUT ZOOM button on the remote
21. Press the INPUT ZOOM button on the remote
control to set to the HDMI mode.
control to set to the HDMI mode.
Activate the adjustment mode display of
Fig. 1-1
and
22. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(32)
on the remote control to
press the channel button
(51)
on the remote control to
select "BRIGHTNESS CENT".
select "CONTRAST MAX".
Press the LEFT/RIGHT button on the remote control
23. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "127".
until the contrast step No. becomes "125".
Check if the picture is normal.
24. Check if the picture is normal.
Playback the DVD(480i) disc.
25. Playback the DVD(480i) disc.
Press the INPUT ZOOM button on the remote
26. Press the INPUT ZOOM button on the remote
control to set to the DVD mode.
control to set to the DVD mode.
Using the remote control, set the brightness and contrast
27. Using the remote control, set the brightness and
to normal position.
contrast to normal position.
Activate the adjustment mode display of
Fig. 1-1
and
28. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(32)
on the remote control to
press the channel button
(51)
on the remote control to
select "BRIGHTNESS CENT".
select "CONTRAST MAX".
Press the LEFT/RIGHT button on the remote control until
29. Press the LEFT/RIGHT button on the remote control
the contrast step No. becomes "125".
until the contrast step No. becomes "154".
Check if the picture is normal.
30. Check if the picture is normal.
19.
25.
26.
23.
24.
27.
28.
29.
30.
15.
18.
20.
16.
17.
21.
22.
D-5
22LV610U