2-4: CONTRAST CENTER
2-5: CONTRAST 40
1.
Place the set in Aging Test for more than 15 minutes.
1.
Place the set in Aging Test for more than 15 minutes.
2.
Receive the color bar pattern. (RF Input)
2.
Receive the color bar pattern. (RF Input)
3.
Using the remote control, set the brightness and
3.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
4.
Activate the adjustment mode display of
Fig. 1-1
and
4.
Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(50)
on the remote control to
press the channel button
(58)
on the remote control to
select "CONTRAST CENTER".
select "CONTRAST 40".
5.
Press the LEFT/RIGHT button on the remote control
5.
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "102".
until the contrast step No. becomes "142".
6.
Check if the picture is normal.
6.
Check if the picture is normal.
7.
Receive the color bar pattern. (VIDEO Input)
7.
Receive the color bar pattern. (VIDEO Input)
8.
Using the remote control, set the brightness and
8.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
9.
Press the INPUT ZOOM button on the remote
9.
Press the INPUT ZOOM button on the remote
control to set to the AV mode.
control to set to the AV mode. Then perform the
Activate the adjustment mode display of
Fig. 1-1
and
above adjustments 4~6.
press the channel button
(50)
on the remote control to
10. Receive the color bar pattern. (S-VIDEO Input)
select "CONTRAST CENTER".
11. Using the remote control, set the brightness and
Press the LEFT/RIGHT button on the remote control
contrast to normal position.
until the contrast step No. becomes "101".
12. Press the INPUT ZOOM button on the remote
Check if the picture is normal.
control to set to the AV(Y/C) mode. Then perform the
Receive the color bar pattern. (S-VIDEO Input)
above adjustments 4~6.
Using the remote control, set the brightness and
13. Receive the color bar pattern. (COMPONENT Input)
contrast to normal position.
14. Using the remote control, set the brightness and
12.
13.
14.
10.
11.
ELECTRICAL ADJUSTMENTS
D-6
22LV610U
co t ast to o
a pos t o
Us g t e e ote co t o , set t e b g t ess a d
Press the INPUT ZOOM button on the remote
contrast to normal position.
control to set to the AV(Y/C) mode. Then perform the
15. Press the INPUT ZOOM button on the remote
above adjustments 10~12.
control to set to the COMPONENT mode.
Receive the color bar pattern. (COMPONENT Input)
16. Activate the adjustment mode display of
Fig. 1-1
and
Using the remote control, set the brightness and
press the channel button
(58)
on the remote control to
contrast to normal position.
select "CONTRAST 40".
Press the INPUT ZOOM button on the remote
17. Press the LEFT/RIGHT button on the remote control
control to set to the COMPONENT mode.
until the contrast step No. becomes "144".
Activate the adjustment mode display of
Fig. 1-1
and
18. Check if the picture is normal.
press the channel button
(50)
on the remote control to
19. Receive the color bar pattern. (HDMI Input)
select "CONTRAST CENTER".
20. Using the remote control, set the brightness and
Press the LEFT/RIGHT button on the remote control
contrast to normal position.
until the contrast step No. becomes "104".
21. Press the INPUT ZOOM button on the remote
Check if the picture is normal.
control to set to the HDMI mode.
Receive the color bar pattern. (HDMI Input)
22. Activate the adjustment mode display of
Fig. 1-1
and
Using the remote control, set the brightness and
press the channel button
(58)
on the remote control to
contrast to normal position.
select "CONTRAST 40".
Press the INPUT ZOOM button on the remote
23. Press the LEFT/RIGHT button on the remote control
control to set to the HDMI mode.
until the contrast step No. becomes "118".
Activate the adjustment mode display of
Fig. 1-1
and
24. Check if the picture is normal.
press the channel button
(50)
on the remote control to
25. Playback the DVD(480i) disc.
select "CONTRAST CENTER".
26. Press the INPUT ZOOM button on the remote
Press the LEFT/RIGHT button on the remote control
control to set to the DVD mode.
until the contrast step No. becomes "83".
27. Using the remote control, set the brightness and
Check if the picture is normal.
contrast to normal position.
Playback the DVD(480i) disc.
28. Activate the adjustment mode display of
Fig. 1-1
and
Press the INPUT ZOOM button on the remote
press the channel button
(58)
on the remote control to
control to set to the DVD mode.
select "CONTRAST 40".
Using the remote control, set the brightness and
29. Press the LEFT/RIGHT button on the remote control
contrast to normal position.
until the contrast step No. becomes "147".
Activate the adjustment mode display of
Fig. 1-1
and
30. Check if the picture is normal.
press the channel button
(50)
on the remote control to
select "CONTRAST CENTER".
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "110".
Check if the picture is normal.
30.
31.
32.
33.
24.
25.
26.
27.
28.
29.
18.
19.
20.
21.
22.
23.
15.
16.
17.
D-6
22LV610U