24
Basic setup
/ / /
To memorize channels
This TV/DVD is equipped with a channel memory feature which allows channels
to skip up or down to the next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be programmed into the
TV/DVDs memory. To use this TV/DVD with an antenna, set the Signal Type
option to the Air mode. When shipped from the factory, this menu option is in
the Cable mode.
Air/Cable selection
MENU
EXIT/CANCEL
ENTER
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Channel”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Press or to select “Auto Ch Memory”,
then press or ENTER.
Ch Label
>>
Channel
Add/Delete
>>
DTV Signal
>>
>>
Auto Ch Memory
3
Press or to select “Signal Type”.
Automatic Search
Start
Auto Ch Memory
Signal Type
Cable
4
Press or to select “Air” or “Cable”.
Automatic Search
Start
Auto Ch Memory
Signal Type
Air
Air
- VHF/UHF channels
Cable - Cable TV channels
5
Press EXIT/CANCEL to return to the normal
screen.
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Channel”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Press or to select “Auto Ch Memory”,
then press or ENTER.
Ch Label
>>
Channel
Add/Delete
>>
DTV Signal
>>
>>
Auto Ch Memory
3
Press or to select “Automatic Search”,
then press or ENTER.
Auto Ch Memory
Signal Type
Cable
Digital Channel Found : 0
Analog Channel Found : 0
: Select
ENTER:Cancel
Automatic Search
Stop
Programming Now
4
The TV/DVD will begin memorizing all the
channels available in your area.
Automatic search
25
Basic setup
Add/Delete channel
You can select the channel that you want to skip.
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Channel”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Press or to select “Add/Delete”, then
press or ENTER.
: Select
ENTER:Set
Channel
Ch Label
>>
Add/Delete
>>
DTV Signal
>>
>>
Auto Ch Memory
3
Press or to select “Add/Delete”, then
press or ENTER.
Clear All
>>
Add/Delete
Adding Channel
>>
: Select
ENTER:Set
Add/Delete
>>
/ / /
MENU
EXIT/CANCEL
ENTER
4
Press or to select the channel that you
want to skip.
CH
Signal
2
Analog
3
Analog
Add
3-001
Digital
Delete
3-002
Digital
Add
4
Analog
Delete
Add/Delete
: Adjust
Add
: Select
5
Press or to select “Add” or “Delete”,
whichever function you want to perform.
CH
Signal
2
Analog
3
Analog
Add
3-001
Digital
Delete
3-002
Digital
Add
4
Analog
Delete
Add/Delete
: Adjust
Delete
: Select
6
Repeat steps 4 - 5 for other channels you
want to add or delete.
7
Press EXIT/CANCEL to return to the normal
screen.
26
Basic setup
Adding Channel (digital channel only)
/ /
MENU
EXIT/CANCEL
ENTER
All channels are deleted from the channel memory.
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Channel”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Press or to select “Add/Delete”, then
press or ENTER.
: Select
ENTER:Set
Channel
Ch Label
>>
Add/Delete
>>
DTV Signal
>>
>>
Auto Ch Memory
3
Press or to select “Clear All”, then press
or ENTER.
Add/Delete
>>
Add/Delete
Adding Channel
>>
: Select
ENTER:Set
Clear All
>>
4
Press EXIT/CANCEL to return to the normal
screen.
Clear All
If you find a new channel unregistered, you can add the
new channel into the channel memory.
1
Tune in the new channel.
2
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Channel”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
3
Press or to select “Add/Delete”, then
press or ENTER.
: Select
ENTER:Set
Channel
Ch Label
>>
Add/Delete
>>
DTV Signal
>>
>>
Auto Ch Memory
4
Press or to select “Adding Channel”,
then press or ENTER. The new channel will
be added into the channel memory.
Add/Delete
>>
Clear All
>>
Add/Delete
Adding Channel
>>
: Select
ENTER:Set
5
Press EXIT/CANCEL to return to the normal
screen.
To memorize channels (Continued)
27
TV operation
TV operation
1
To turn on the TV/DVD, press
POWER
.
(POWER indicator on the front of the unit changes
green. It may take approx. 10 seconds for a picture
to appear on screen.)
2
Adjust the volume level by pressing
VOL +
or
–
.
The volume level will be indicated on the screen
by orange bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of orange bars also decreases.
3
Set the Signal Type option to the appropriate
position (see “Air/Cable selection” on page
24
).
Air
- VHF/UHF channels
Cable - Cable TV channels
4
Press the
Direct Channel Selection (0-9, –)
buttons
or
CH
/ to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
TV operation
POWER
TV operation
0–9, –
VOL +/–
CH /
TO SELECT ANALOG CHANNELS
1-9:
Press 1-9 as needed. Example, to
select channel 2, press
2
, then press
ENTER
.
10-99:
Press the 2 digits in order. Example,
to select channel 12, press
1
,
2
, then
press
ENTER
.
100-125: Press the 3 digits in order. Example, to
select channel 120, press
1
,
2
,
0
, then
press
ENTER
.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the
–
button,
followed by the remaining number.
Example, to select channel 015-001, press
0
,
1
,
5, –, 0, 0, 1.
If a channel is selected with only audio content,
“Audio only” will be displayed on the screen.
If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
The same program may be available on either
an analog channel or a digital channel. You may
choose to watch either format.
If a channel is selected to which you have not
subscribed, “Digital channel is encrypted” will
be displayed on the screen.
•
•
•
VHF/UHF/CABLE CHANNELS
Air
Cable
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-135
(100) (135)
01 (5A)
Note:
If a channel with no broadcast is selected, the sound
will automatically be muted.
It may take a few seconds for a digital channel picture
to appear on screen after being selected.
•
•
ENTER
