9
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel set into memory, skip-
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV’s
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
Press
MENU
.
Press
SET +
or
–
until the indicator next to
“CH SETUP” begins to flash, then press
ENTER
.
Press
SET +
or
–
until the indicator next
to “TV/CABLE” begins to flash.
Press
ENTER
to select the TV or CABLE
mode. The arrow indicates the selected
mode.
Press
MENU
repeatedly until the menu
screen is cleared.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.
Press
MENU
repeatedly until the menu screen is
cleared.
TO ADD/DELETE CHANNELS
Press
MENU
.
Press
SET +
or
–
until the indicator next to
“CH SETUP” begins to flash, then press
ENTER
.
Press
SET +
or
–
until the indicator
next to “ADD/DELETE” begins to flash,
then press
ENTER
.
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0
–
9),
CH +
or
–
,
SET
+
or
–
.
1
2
3
4
5
4
1
2
3
4
5
Press
ENTER
to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press
ENTER
if you wish
to ADD the unmemorized channel. The channel indica-
tor will change from red to green when a channel is
added and the channel will be memorized.
If a memorized channel was selected (step 4), the chan-
nel indication will be green. To delete the channel from
Press
MENU
repeatedly until the menu screen is
cleared.
6
memory, press
ENTER
repeatedly until
“DEL” appears on-screen. The channel
indicator will change from green to red
when a channel is deleted. Repeat
steps 4 and 5 for each channel to be
added or deleted.
MENU
PICTURE
LANGUAGE
V-CHIP SET
LOCK
CH SETUP
ON TIMER
ADD
CH 012
〈
0 – 9 / + / – / ENTER / MENU
〉
MENU
PICTURE
LANGUAGE
V-CHIP SET
LOCK
CH SETUP
ON TIMER
AUTOMATIC CHANNEL MEMORY
Press
MENU
.
Press
SET +
or
–
until the indicator next to
“CH SETUP” begins to flash, then press
ENTER
.
1
2
MENU
PICTURE
LANGUAGE
V-CHIP SET
LOCK
CH SETUP
ON TIMER
Press
SET +
or
–
until the indicator next
to “AUTO CH MEMORY” begins to flash,
then press
ENTER
. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
3
ADJUSTING THE PICTURE
You can adjust the settings for brightness, contrast, color,
tint and sharpness.
1
2
4
Press
SET +
or
–
to adjust the setting.
CONTRAST
COLOR
BRIGHTNESS
TINT
SHARPNESS
3
Press
MENU
.
Press
SET +
or
–
until the indicator next to “PICTURE”
begins to flash, then press
ENTER
.
Press
ENTER
repeatedly to select the item you want to
adjust.
TO RETURN TO INITIAL SETTING:
Press
RESET
while the picture adjusting mode appears
on-screen.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
higher
lighter
deeper
greenish
lower
darker
paler
reddish
softer
sharper
–
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
〈
+ / — / ENTER / MENU
〉
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
〈
+ / — / ENTER / MENU
〉
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
〈
+ / — / ENTER / MENU
〉
3X30321A[E] P08-12
22/12/05, 4:38 PM
9
