102
Setting up your TV
Displaying TV status information
Using the HDMI
TM
settings feature
HDMI
TM
1(2, or 3) RGB Range
You can select RGB range of HDMI inputs from the following
modes, as described below:
1
From the
Options
menu, highlight
Input Options
, and then
press the
ENTER
button.
2
Highlight
HDMI 1(2, or 3)
RGB Range
and then press the
ENTER
button.
3
Press the
/▼(arrow) buttons to select
Auto
,
Full
, or
Limited
,
and then press the
ENTER
button.
Mode
Description
Auto(default)
Adjusts RGB full range signal automatically.
Full
RGB input signal is displayed in the range from 0 to 255.
Limited
RGB input signal is displayed in the range from 16 to 235.
The HDMI
TM
setting (RGB Range) needs proper HDMI
TM
source
devices. If your HDMI
TM
source device does not support these
features, the TV may not work properly when this feature is enabled.
HDMI
TM
Information Display
Viewing the HDMI
TM
signal information:
1
From the
Options
menu, highlight
HDMI Information
Display
, and then press the
ENTER
button.
2
Press the
/▼(arrow) buttons to select
On
or
Off
, and then
press the
ENTER
button.
3
Press the
INFO
button. The normal banner and signal
information banner appear.
The signal information banner will appear when this feature is set to
On and you watch an HDMI
TM
input.
If you press the INFO button when this feature is set to Off, only the
normal banner will appear.
Displaying TV status information
To display TV status information using the
RECALL
button:
v
Press the
RECALL
button on the remote control.
The following information will be displayed (if applicable):
v
Current input (
ANT/CABLE, Video
, etc.)
