ENGLISH
- 17 -
Input selection, AV connections
Settings for the INPUT and OUTPUT sockets so that the television recognises connected equipment.
See
page 7
for a clear view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to
the correct
Input
socket. Alternatively press the ex-
ternal source selection button
to select the
source from the menu displayed.
Input selection
Use the Input Selection if the television does not
switch over automatically.
b
Press
to select
TV
, AV-1, AV-2, AV-2S,
YPbPr,
AV-4, AV-4S
or
PC RGB.
To return to television mode press
again.
OUTPUT signal selection for AV-2
(Scart 2)
This enables selection of the source to output from
AV-2. For example, to record transmissions in ste-
reo from a stereo decoder - connect a stereo de-
coder to
AV-1
and stereo media recorder to
AV-2
,
then select
AV-1
as the
Av-2 Output.
The signal re-
ceived through SCART 1 will output directly through
SCART 2.
b
From the
Feature
menu, press
Down
to select
Av-2 Output.
)HDWXUH
79
c
Use
Left
or
Right
to change
Av-2 Output
op-
tion to:
TV
= The last television programme selection.
AV-1
= The picture from equipment connected
to SCART 1.
PC RGB Sound Mode
b
From the
Feature
menu, press
Down
to select
PC RGB Sound Mode.
c
Use
Left
or
Right
to change
PC RGB Sound
Mode
option to
TV, AV-1, AV-2,
AV-4
, YPbPr
or
PC RGB.
A01-23730W&ENG-17MB08P-1705UK-50078312.p65
21.03.2006, 15:01
17