16
General Operation
NOTES
HDMI cables must be used to connect HDMI CEC-compatible
devices to your TV.
The HDMI CEC feature of the connected device must be
turned on.
If you connect an HDMI device that is not HDMI CEC-
compatible, all the HDMI-CEC control features do not work.
Depending on the connected HDMI device, the HDMI-CEC
Control feature may not work.
Store Mode
Store Mode contains Home,Store Demo and Store.
Software Update(USB)
Update the right software by USB device.
Version
View software version.
Using the Time Menu
In each of
Time
menu, you can:
»
Press the
[
▲
/
▼
]
button to select an item.
»
Press the
[
OK
/
►
]
button to enter the sub-menu
»
After finishing your adjustment, press
[
MENU
]
button to save
and return back to the previous menu.
Adjust the time settings to suit your preference.
•
Clock:
Set the current time based on your location, set the time
to display in 24-hour format. (You can set times manually when
Auto Sync is off. And the time format will vary by country/region.)
•
On
Time :
Enable the Power On Timer to Off, Once or Every day,
Mon to Fri, Mon to Sat, Sat to Sun, Sunday.
•
Sleep Timer:
Set TV automatically turn off within a specified
time
:
Off, 15Min... 120Min, 240Min.
NOTE:
The remote control does not make any operation in the
hypothesis time,
if you have any operation, it will clear auto
standby and reset the time.
•
Auto Sleep:
Select the TV standby time: Off, 3H, 4H, 5H. (This
feature will vary by country.)
•
Auto Sync:
Time Synchronization setting, when Auto Sync is
set to on, the time provided by the programme is automatically
synchronized each time you switch to the DTV programme. And
clock time cannot be modify manually.
•
Time Zone:
Select your location time zone.
•
OSD Timer:
Set the length of menu diaplay time: 5S, 15S, 30S,
Always.
Using the Lock Menu
In each of
Lock
menu, you can:
»
Press the
[
▲
/
▼
]
button to select an item.
»
Press the
[
OK
/
►
]
button to enter the sub-menu
»
After finishing your adjustment, press
[
MENU
]
button to return
back to the previous menu.
System Lock
Press the
[
OK
/
►
]
button to turn on or off system lock. Enable
or disables all locks. Original password is “0000”, and if forget
what you set, please call the service center.
Set Password
After enter original password “0000” , then enter your new
password. If you want to change your lock password, first enter
the new password then enter the same password again.
Block program
Press
[
OK
/
►
]
button to display channel information on
Channel Lock list, then press
[
Green ]
button to lock you want to
Block programme.
Parental Guidance
Press
[
OK
/
►
]
button to select the TV programme rating which
is suitable for your children.
Key Lock
Set key lock on or off. You can not use Key panel button when
Key Lock is turned on
Hotel Mode
Press the
[
OK
/
►
]
button to turn on or off hotel mode.