Toshiba 26A3000A, Owner'S Manual

12

Getting started

Watching TV programs

Selecting the menu language

Choose from 9 different languages (English, Chinese (CS), 
Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) 
for the on-screen display.

1

Press

M

, then press 

I

 or 

i

 to display 

SET UP

 menu.

2

Press

u

 or 

U

 to select 

Language

.

3

Press

I

 or 

i 

to select the desired language.

Changing the program position

1

Enter the desired program position number using the 

Number

 buttons on the remote control.

For program positions below 10, use 0 and the required 
number e.g., for program position 1.

2

You can also change the program position by using 

>

 or 

<

.

The program position will be displayed on the screen with 
the Mono/Stereo/Dual audio status.

Note:

The program position selection change between different 
format channels takes several seconds.

Switching between two program positions

You can switch two program positions without entering actual 
position number each time.

1

Select the first program position you want to view.

2

Select the second program position with the 

Number

buttons (0-9).

3

Press

:

. The previous channel will be displayed.

Each time you press 

:

, the TV will switch back and forth 

between the two program positions.

Displaying the on-screen information

1

Press 

K

 to display the following on-screen 

information.

The information will disappear in 6 seconds.
• Program position or external input mode selected
• Program skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status 

2

To erase the display instantly, press 

K

 again.

Programming channels into the 
TV’s channel memory

• First, use the Auto tuning function to preset all the active 

channels in your area automatically. Then, arrange the 
preset channels with the Manual tuning function so that you 
can tune into only desired channels.

• Use the Manual tuning operation if desired channels cannot 

be preset with the Auto tuning or if you would like to preset 
channels to specific position numbers one by one.

Programming channels automatically

1

From the 

SET UP

 menu, press  

u

 or 

U

  to select 

Auto

tuning

.

2

Press 

Q

 to display the 

Auto tuning

 menu.

3

Press 

Q

 to start the automatic search.

The search will begin for all available stations.

The slide bar will move along the line as the search 
progresses.
If you make a mistake, simply repeat steps 1-3 to start 
again from the beginning.

4

When the automatic search is completed, the TV will 
automatically return to the first program position.

5

Press 

>

 or 

<

 to view the programmed position.

Note:

When you preset the program channel which sound of 
broadcast transmission system adopts “M” system, the sound 
system may not be tuned correctly if the radio waves transmit 
badly. At that time, preset the channel by 

Manual tuning

.

The countries such as Myanmar, Brazil, Chile, Colombia apply 
to this case. See page 26 for more details.

AV connection

Manual tuning

OK

OK

Auto tuning

OK

Language

SET UP

English

OK

Picture position

MENU

Back

Watch TV

EXIT

r     R

ABCD

4

Stereo

MENU

Back

Watch TV

EXIT

Auto tuning

EXIT for no change.

Press OK key to start.

!

Searching

Stop

Pos

:2

Auto tuning

EXIT