26
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.
Problem
Solution
TV will not turn on
•
Make sure the power cord is plugged in, then press POWER.
•
The remote control batteries may be dead. Replace the batteries.
No picture, no sound
•
Check the antenna/cable connections.
No sound, picture OK
•
The sound may be muted. Press VOLUME.
•
The station may have broadcast difficulties. Try another
channel.
Poor sound, picture OK
•
The station may have broadcast difficulties. Try another channel.
Poor picture, sound OK
•
Check the antenna connections.
•
The station may have broadcast difficulties. Try another channel.
•
Adjust the PICTURE menu.
Poor reception of broadcast channels
•
The station may have broadcast difficulties. Try another channel.
•
Check the antenna connections.
•
If you are using a VCR, make sure the TV/VCR button is set correctly.
Cannot receive above channel 13
•
Make sure TV/CABLE is set to CABLE mode.
Unable to select a certain channel
•
The channel may be blocked out with the V-Chip feature, or erased
with the add/erase feature.
Multiple images
•
The station may have broadcast difficulties. Try another channel.
•
Use a highly directional outdoor antenna.
Poor color or no color
•
The station may have broadcast difficulties. Try another channel.
•
Adjust the TINT and/or COLOR in the PICTURE menu.
•
If you change the direction of the TV while it is turned on, the picture
could suffer from color shading. If so, turn off the TV and allow it to cool
down for several hours before turning it on again.
No stereo or SAP sound from a
•
Make sure the MTS feature is set properly.
known MTS broadcast
The remote control does not operate
•
Check to see if the TV/VCR/CABLE mode is properly set.
•
There may be an obstruction between the remote control and the
remote control sensor.
•
The remote control batteries may be dead. Replace the batteries.
The V-Chip PIN code does not work
•
Change or reset your PIN code (see page 14, Selecting a PIN code).
Appendix
3K10201B P22-BACK
7/24/01, 5:44 PM
26