Setting up
y
our T
V
18
Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV’s memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the
CHANNEL
NUMBERS
to select the channel.
2. Press
MENU
.
3. Press
x
or
•
to highlight the SET UP menu.
4. Press
y
or
z
to highlight ADD/ERASE.
MOVE SELECT [ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD]
ERASE
SET UP
5. Press
x
or
•
to select ADD or ERASE, whichever function you
want to perform.
6. Press
MENU
.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press
EXIT
to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press
CHANNEL
y z
.
To change to a specific channel (programmed or unprogrammed):
Press the
CHANNEL NUMBERS
(0–9 and 100).
Note:
For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth’s magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press
MENU
, and then press
x
or
•
until the SET UP menu
appears.
2. Press
y
or
z
to highlight IMAGE TILT.
3. Press
x
or
•
to adjust the picture tilt (from –10 to +10).
MOVE SELECT [ ]
[ ]
SET UP
–
+
MORE
DEMO
[START] STOP
IMAGE TILT +3
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL POWER
TV
CABLE
VCR
ENT
ENTER
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7
8
9
0
100
Channel
Numbers
MENU
CH
CH (Channel)
VOL
EXIT
