*
a decoder could be:
Digital Satellite, Analogue
Satellite, or any other
compatible decoder
.
WE RECOMMEND THAT YOU USE SCART
LEADS IN ADDITION TO AERIAL CABLES
WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of
the television. If you use a decoder* and/or a
video recorder it is essential that the aerial cable
is connected through the decoder and/or through
the video recorder to the television.
Scart leads:
Connect the video recorder
IN/OUT
socket to the
TV. Connect the decoder
TV
socket to the TV.
Connect the video recorder
SAT
socket to the
decoder
VCR
socket.
Before running
Auto tuning
put your decoder
and video recorder into
Standby
.
The TV back connections…
…switching on…
Before connecting any external equipment, turn off all main power switches.
With the controls on the SIDE of the TV:
If the red power-on light on the front is unlit, press the POWER
button on the SIDE to switch the set on, then press a number
button on the remote control to see the screen.
28Z23G / 28Z23B / 28Z27B models:
32Z23G / 32Z23B / 32Z27B models:
On the FRONT of the TV:
If the red power-on light on the front is unlit, press the POWER
button on the FRONT to switch the set on, then press a number
button on the remote control to see the screen.
GREEN = On Timer is set
RED = Power On
Power Button
5
SETTING UP
Connecting and turning
on your new TV
To conserve energy
, do
not leave the set in
Standby for long periods
of time.
Power button
GREEN = On Timer is set
RED = Power On
video recorder
IN
OUT
IN
OUT
the back of your TV
decoder*
SAT
IN/OUT
VCR
TV
SCART 1
SCART 2
…and with the remote control:
Press the Standby Button
i
:
This allows you to put the set into
standby mode when leaving the TV
unattended for short periods of time. To return to TV mode
press the
i
button, or any of the numbered buttons on the
remote control. The picture may take a few seconds to appear.